WARRANTIES

NAUTO LIMITED WARRANTY

WARRANTY:

Subject to the limitations on all warranties (which are set forth below), Nauto, Inc. (“Nauto”) warrants, to the original purchaser only, that the Nauto product with which this limited warranty is provided (the “Product”) will be free from defects in materials and workmanship during normal and customary use for for ninety (90) days from the original date of purchase, or the duration specified in your contract, whichever is longer, provided that the Product has not been abused, altered, defaced, or misused, or otherwise damaged through the act or neglect of the consumer or a third party.  

WARRANTY LIMITATIONS:

This warranty does NOT cover normal wear and tear or any damage done as a result of tampering or an attempt to disassemble or otherwise modify the Product.  

If a Product is purchased from a seller other than Nauto or an authorized Nauto reseller, the warranties set forth above do not apply, and in such event Nauto disclaims all warranties for the Product, including the warranties of merchantability and fitness for a particular purpose.

Any repaired Product, or any replacement, will be warranted for for ninety (90) days from the original date of purchase, or the duration specified in your contract, whichever is longer, not from the repair or replacement date.

ALL WARRANTIES IMPLIED BY STATE LAW, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE.  There are no other warranties that extend beyond the warranties set forth above.  Some states do not allow limitations on how long an implied warranty lasts, so this limitation on the duration of warranties may not apply to you.

WITH THE EXCEPTION OF ANY WARRANTIES IMPLIED BY STATE LAW AS HEREBY LIMITED, THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTIES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF THE MANUFACTURER OR SELLER.

NAUTO IS NOT LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE USE OF NAUTO PRODUCTS.  Some states do not allow the exclusion or limitation of incidental or consequential damages, so this disclaimer of liability may not apply to you.

No person, agent, distributor, dealer or other third party is authorized to change, modify, or extend the terms of these warranties in any manner whatsoever.

These warranties give you specific legal rights. You may also have other rights that vary from state to state.

WARRANTY PROCEDURES:

If a Product is eligible for warranty pursuant to the terms and conditions stated above, Nauto will, upon prompt return of the Product to Nauto: (1) repair the defect; (2) replace the defective Product with the same or a comparable Product; or (3) refund your actual purchase price less reasonable depreciation based on actual use in any instance where the Product is no longer available and repair is not possible.

To return a Product, please contact the Nauto customer service department directly at (888) 628-8606 or support@nauto.com.  Once the customer service department determines that the Product is eligible under a warranty set forth above, a “Return Authorization Number” will be issued to you along with shipping instructions. The Return Authorization Number must be visible on the exterior of the package containing the returned product in order to be physically received by the warehouse. Issuance of a Return Authorization Number does not mean that Nauto will necessarily accept the warranty claim as valid; conditions which make a returned Product ineligible for warranty may be identified upon Nauto’s receipt of the Product.

If you have any questions regarding the warranties described above, please contact the Nauto customer service Department at (888) 628-8606 or  support@nauto.com.

 

Regulation

Model: Nauto 2

FCC ID 2AKJ5-N2

IC 22237-N2

 

General Combined FCC Part 15 and IC compliance declaration

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

 

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device.

 

Le présent appareil est conforme aux CNR Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en

 

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Can

 

FCC Responsible Party Identification

The identification of the responsible party: Nauto Inc., 380 Portage Ave. Palo Alto, CA 94306

+1 (888) 628-8606, support@nauto.com

Combined MPE (SAR) statement

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules.  This equipment should be installed and operated so that the radiator is kept at least 7.9 inches (20 cm) or more away from a person’s body.

 

FCC Warning against modification

FCC Caution:  Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

WWAN Antenna Type: PIFA Antenna

WLAN 2.4G and BT Antenna Type: Monopole Antenna