Welcome to your Nauto device! This guide contains everything you need to know about driving a vehicle with the Nauto device.
The Nauto device records activity both inside and outside of the vehicle, which will then help you operate your vehicle more efficiently and safely. You’ll also always be connected to your fleet manager in case there is a problem on the road.
What you may need to know
- The Nauto device has already been installed and tested in your vehicle by a qualified professional.
- The device includes two cameras: one that records activity inside the vehicle and one that records activity outside the vehicle.
- Looking at the device through the windshield, a green light should always be on.
- When the vehicle is moving, the cameras record video of activity inside and outside the vehicle. When the vehicle is parked, the device does not record video but takes periodic snapshots.
- There’s a small fan in the device that may make a faint noise. This is normal and indicates that the device is working correctly.
- The device may display a faint IR light when in night vision mode
Controlling the volume
Two buttons at the base of the device control the volume of any sounds the device makes.
- The ‒ button turns down the volume.
- The + button turns up the volume.
- Don’t tap on or try to move the Nauto device. The cameras in the device are carefully calibrated, so any manipulation of the device could cause it to become misaligned.
- If you see a small red light display on the Nauto device, notify your fleet manager that there could be an error with the device.
- Avoid touching the wire that extends from the Nauto device. If the wire comes out of its installed location, contact your fleet manager.
- Be sure the area of the windshield in front of the device stays clear. Generally, if you can see through the windshield, it’s clear enough. But in snowy or muddy conditions, the vehicle’s windshield wipers may not reach the area where the Nauto device is mounted. In this case, you should manually clean the windshield in front of the device.
Model: Nauto 2
FCC ID 2AKJ5-N2
IC ID 22237-N2
General Combined FCC Part 15 and IC compliance declaration
“This device complies with part 15 of the FCC Rules and RSSs (RSS-Gen and RSS-210) of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”
FCC Responsible Party Identification
The identification of the responsible party: Nauto Inc., 380 Portage Ave. Palo Alto, CA 94306
+1 (888) 628-8606, email@example.com
Combined MPE (SAR) statement
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of he IC radio frequency (RF) Exposure rules. This equipment should be installed and operated so that the radiator is kept at least 7.9 inches (20 cm) or more away from a person’s body (excluding extremities: hands, wrists, feet and ankles).
FCC Warning against modification
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.